SK-T8 YUKON GEAR AXLE Pinion Shim Bolt Kit Gm

Review YUKON GEAR AXLE Pinion Depth Shim Kit For8in Gm 7.5in 8.2in And Bolt Truck for GM 2012

Introducing the Yukon Gear SK-T8 Pinion Shim Kit, an essential addition to your 7.5in, 8.2in, or 8in GM 12-bolt rear end. This kit is specifically designed to provide optimal performance and durability for your off-road or high-performance applications.

The Yukon Gear SK-T8 Pinion Shim Kit includes a comprehensive set of shims made from high-quality, heat-treated steel. These shims are precision-engineered to ensure a perfect fit and provide the necessary clearance between the pinion and the differential. This, in turn, reduces unwanted noise, vibration, and wear, leading to a smoother and more efficient drivetrain.

The shims in this kit are available in various thicknesses, allowing you to customize the setup to your specific needs. With 0.010-inch, 0.015-inch, 0.020-inch, and 0.025-inch shims included, you can fine-tune the pinion angle and engage the gears more effectively.

Installation is straightforward, thanks to the detailed instructions provided with the kit. The shims are easy to install, and no special tools are required. However, it's essential to follow the correct procedure to ensure proper alignment and accurate tooth engagement.

Additionally, the Yukon Gear SK-T8 Pinion Shim Kit is designed to work seamlessly with other Yukon Gear differential components, such as their gear sets, carriers, and bearings. This makes it an excellent choice for those looking to upgrade their entire differential system.

In conclusion, the Yukon Gear SK-T8 Pinion Shim Kit is an indispensable tool for anyone looking to optimize the performance and durability of their 7.5in, 8.2in, or 8in GM 12-bolt rear end. With its high-quality materials, precise engineering, and ease of installation, this kit is sure to provide you with the peace of mind you need to tackle any off-road adventure or high-performance driving experience.

The Yukon Gear Axle SK-T8 Pinion Shim Kit is designed to address the issue of excess play or noise in the pinion joint of GM 12-bolt rear ends with 8-inch, 7.5-inch, and 8.2-inch axles. This kit includes various shims to adjust the pinion depth and eliminate play. Here are some pros and cons to consider when deciding whether to purchase this kit:

1. Reduces or eliminates pinion play: The primary reason for purchasing this kit is to address the issue of excessive pinion play or noise. By using the correct shims to adjust the pinion depth, the kit can help eliminate play and improve the overall performance and durability of the axle.

2. Easy installation: The kit comes with detailed instructions, and the installation process is relatively straightforward. It can be done in a home garage with basic tools.

3. Affordable: Compared to other solutions, such as replacing the entire axle assembly or using aftermarket axle housings, the pinion shim kit is a more affordable option.

4. Improves longevity: By reducing pinion play, the kit can help prolong the life of the axle components, including the pinion bearing and seal.

1. Requires precise measurements: Properly installing the shims requires precise measurements of the pinion depth. Failure to measure correctly could result in incorrect shim placement and ineffective results.

2. May not be a permanent solution: Depending on the cause of the pinion play, the kit may not be a permanent solution. For example, if the cause is excessive wear on the pinion bearings or other components, the shims may only provide a temporary fix.

3. Limited applicability: The kit is designed specifically for GM 12-bolt rear ends with 8-inch, 7.5-inch, and 8.2-inch axles. It may not be compatible with other axle configurations.

The Yukon Gear Axle SK-T8 Pinion Shim Kit is a viable solution for addressing excessive pinion play or noise in the rear end of GM 12-bolt rear ends with 8-inch, 7.5-inch, and 8.2-inch axles. It is a cost-effective and relatively easy-to-install option that can help improve the performance and durability of the axle. However, it requires precise measurements and may not be a permanent solution for all causes of pinion play. If you are experiencing excessive pinion play or noise and are comfortable with the installation process, this kit is worth considering. If you are unsure about the cause of the issue or are not comfortable with the installation process, it may be worth exploring other options, such as replacing the entire axle assembly or using aftermarket axle housings.

Details:

Yukon Gear pinion depth shim kit for8in / Gm 7.5in 8.2in 12 bolt truck.

specifications differentialsdepo:

• for makes: Gm
• for years: 2012
• brand: Yukon Gear Axle
• mpn: Sk-t8
• type: Truck Car Van
• item length: 3.500
• country of origin: In
• upc: 883584550648

payments differentialsdepo:

• wallet: apple-pay
• credit card: mastercard
• other

returns differentialsdepo:

• paid by: seller
• policy: returns accepted
• time: 30 days

offer differentialsdepo:

• availability: in stock
• in stock #: 5
• options: ship-to-home
• sold #: 11
• prices: $28.90–$35.89
• item condition: New
• started: october 21, 2025

general differentialsdepo:

• category: Auto Parts > Transmission Drivetrain > Differentials, Assemblies > Additional

shipping differentialsdepo:

• type: fixed
• class: standard
• transit: 2-4 days
• service: standard

seller differentialsdepo:

• # reviews: 45256
• city: saint paul, minnesota
• rating: 97.2%