34801-CL360A105 YUKON GEAR AXLE Pinion Preload Shims F-350

Review YUKON GEAR AXLE Yukon-gear Replacement Pinion Preload Shims For Ford 60 for FORD F-350 DANA 1970–1997

Introducing the Yukon Gear Pinion Preload Shims (Part Number: 34801-CL360A105) - a must-have accessory for Ford F-350 vehicle owners with a Dana 60 rear axle, particularly those with models produced between 1970 and 1997. These shims play a crucial role in ensuring proper pinion angle alignment and maintaining optimal gear tooth contact.

The Yukon Pinion Preload Shims are meticulously engineered to address the common issue of pinion angle misalignment that can occur in older Ford F-350 models. Misalignment can lead to premature wear of the pinion and gear teeth, causing noise, vibration, and ultimately, reduced performance and increased maintenance costs.

These shims are designed specifically for the Dana 60 rear axle, which is a popular choice for Ford F-350 trucks due to its strength and durability. The shims are made of high-quality, heat-treated steel, ensuring they can withstand the heavy loads and tough conditions typical of off-road and towing applications.

Each shim kit comes with a set of preload shims in various thicknesses, allowing you to fine-tune the pinion preload to your specific vehicle's requirements. Proper pinion preload is essential for maintaining optimal gear mesh and ensuring consistent power transfer between the engine and the wheels.

Installing the Yukon Gear Pinion Preload Shims is a straightforward process that can be done with common hand tools, making it an excellent DIY project for the enthusiast or professional mechanic. The included installation instructions provide clear, step-by-step guidance to ensure a successful installation.

By using Yukon Gear Pinion Preload Shims, you'll not only improve the performance and longevity of your Ford F-350 with a Dana 60 rear axle but also enjoy the peace of mind that comes with knowing your vehicle is operating at its best. So, don't let pinion angle misalignment hold you back upgrade your Ford F-350 today with the Yukon Gear Pinion Preload Shims.

Buying Yukon Gear Pinion Preload Shims for Ford F-350 (1970-1997 Dana 60): A Detailed Analysis

The Yukon Gear Axle 34801-CL360A105 pinion preload shims are designed to help adjust the pinion angle in Ford F-350 vehicles with Dana 60 axles from 1970 to 1997. These shims can improve vehicle performance and durability by ensuring proper axle geometry. In this analysis, we will discuss the potential advantages and disadvantages of purchasing these shims.

1. Improved Axle Geometry: Properly installed shims help maintain the correct pinion angle, reducing wear and tear on the drivetrain components and ensuring optimal performance.

2. Reduced Noise and Vibration: Misaligned axles can cause unwanted noise and vibration. By correcting the pinion angle with these shims, you can experience a smoother and quieter ride.

3. Increased Durability: By ensuring proper pinion angle, you can extend the life of your axle components, such as the pinion bearings and CV joints.

4. Easy Installation: The shims are relatively simple to install, making them a cost-effective solution for addressing potential axle alignment issues.

1. Potential for Over- or Under-Correction: Improperly installing the shims can lead to over- or under-correction, which can negatively impact the performance and durability of the drivetrain components.

2. Additional Cost: While the shims themselves are not overly expensive, the cost of purchasing and installing them can add up, especially for those without the necessary tools or expertise.

3. Limited Longevity: The shims may need to be replaced multiple times throughout the life of the vehicle as the pinion angle adjusts due to wear and tear on the drivetrain components.

The Yukon Gear Axle 34801-CL360A105 pinion preload shims offer several advantages for Ford F-350 owners with Dana 60 axles, including improved axle geometry, reduced noise and vibration, and increased durability. However, they also come with potential disadvantages, such as the risk of over- or under-correction and the additional cost of installation. Ultimately, the decision to purchase these shims depends on the individual's specific needs, budget, and expertise.

If you experience noticeable noise, vibration, or performance issues with your Ford F-350's Dana 60 axle, it may be worth considering the Yukon Gear pinion preload shims as a potential solution. However, it is essential to consult with a qualified mechanic or experienced DIYer to ensure proper installation and avoid potential issues. Additionally, consider the long-term cost implications, including the potential for multiple shim replacements throughout the vehicle's life.

Details:

Width : 2.00 inch. Part number: SK 34801. Proxy number: 55015. Factory sealed - brand new in box.

Supplier title: Yukon Gear replacement pinion preload shims for Dana 60 / 61 70-u.

specifications differentialsdepo:

• for models: F-350, Dana
• for makes: Ford
• for years: 1970–1997
• brand: Yukon Gear Axle
• mpn: 34801-cl360a105
• type: Pinion Preload Shim
• item length: 0.170
• fitment type: Direct Replacement
• generic keywords 1: See Notes
• intended use: Automobiles
• warranty: 1 Year
• upc: 711792760774

payments differentialsdepo:

• other
• wallet: apple-pay
• credit card: discover

general differentialsdepo:

• category: Auto Parts > Transmission Drivetrain > Differentials, Assemblies > Additional

seller differentialsdepo:

• city: reno, nv
• # reviews: 69547
• rating: 98.6%

returns differentialsdepo:

• policy: returns accepted
• paid by: seller
• time: 30 days

offer differentialsdepo:

• started: april 18, 2025
• prices: $19.89–$28.99
• item condition: New
• availability: in stock
• options: ship-to-home
• sold #: 28
• in stock #: 2

shipping differentialsdepo:

• class: standard
• type: fixed
• transit: 5-5 days
• service: standard