30174 GM Bolt Posi Ring Pinion Chevy

Similar Items:

• Gm 15793756 2004-2007 Cts-v Manual 3.73 Rear Differential With Bmr Pinion Support Brace This listing is for 2004 -2007 CTS-v manual 3.73 rear differential w/ BM pinion support brace. Item brand: Gm. Please refer to all photos for more details as they are the best part of...(December 19th, 2023)
• Gm Gm8.5-28posi Used 8.5 Inch 10 Bolt Chevy 28 Spline Posi Unit Chevrolet Gmc Locker 4-SPRING clutch posi unit similar to an Eaton brand. This is a Gm 8.5 10-BOLT posi unit in 28 spline. It has not been ran much if at all. No longer need it for the build. Great for a street rod, daily driver, 4X4 project. 400LB springs...(December 30th, 2023)
• Auburn Gear 542031 Gm 12 Bolt 8.875 4-series Car Posi 30 Spline 4.10 And Up Camaro Nova Carrier bearings are not spun on their hubs but will need replacing. Cross pin is not wobbled out and fits snug in its bore. Clutch resistance was checked with two axles and shorter bars turning in the same direction decent. Ring gear area has some minor marks on it as seen in the pics. Deck height...(December 30th, 2023)
• American Axle Manufacturing Gm11.5-373 Gm Aam 11.5 Inch Chevy Ring And Pinion Gears Bolts 3.73 Ratio Rearend 40101173 Tooth count: 11X41. Gm AMA 11.5 chevy ring pinion gears 3.73 ratio: excellent used condition, removed from a low mile 2015 2500HD truck. AMA components mean performance to the vehicle manufacturers standards. Application: 2001 -2016 chevy dodge AMA 11.5 14 bolt reared will not fit 2014 -NEWER ...(December 31st, 2023)
• Gm 26033477 1988-05 10 Bolt 7.625 Open Carrier Loaded Case 3 Series Oem Original 3443 28 spline carrier. 3.23 and lower gears. Gm original parts. Removed from a 1998 GMC jimmy with 3.42 gears. Fits 10 bolt 7.625 rear ends. Spider gears and shaft are in good shape. Will need new carrier bearings and a shaft lock bolt. Inspect pictures for condition...(January 6th, 2024)
• Gm 26050890 26050889 Oem 7.5 7.6 10 Bolt 3.42 Gear Set 26050890 Camaro Firebird S10 Monte Carlo These are used but in good condition. Comes with ring gear bolts and assortment of shims. Oem Gm 7.5 /7.6125 10 bolt 3.42 gear ratio ring and pinion set. Part # on pinion is 26050889.THESE gears to be used with a series 3 carrier. Series 3 carriers are 3.23 and numerically higher. Part # on ring ...(January 6th, 2024)
• Motive G888373 Gear Gm 3.73 12 Bolt Ring And Pinion Set Excellent Condition Teeth, splines and threads are near perfect. Excellent used condition. Used for only a short time. Gm 3.73:1 ratio. 41 tooth, 8.875 ring gear, 11 tooth 1.625, 30 spline, pinion gear. Motive brand, performance ring and pinion set, part# G888373...(January 13th, 2024)
• Mastercool 78-3213 A c Clutch Puller And Installer Tool Gm I bought this tool in 2021 when was teaching automotive technology. I used this for one class, day. An a/c clutch removal/installer tool Gm. There is lite rust and a little mushrooming on the end as shown in last picture. It Hans't been used since...(January 13th, 2024)
• Richmond 49-0034-1 Gm 8.5 Inch Ring And Pinion Chevrolet Pontiac Olds Chevelle Camaro Gto Z 28 Make sure what equipment Gm placed in your vehicle. This set fits numerous Gm rear ends such as 70-76 chevy, CHEVELLE,70-75 chevy ii, 70-81 Camry, got/fire bird, 72-81 trans am, Eli amino 70-76, some K-10; C10; blazer; suburban. Richmond gear set for Gm products needing 8.50 ring GEAR/1.626 pinion ...(January 14th, 2024)
• Gm Gm8.2-28posi Used 8.2 Inch 10 Bolt Chevy 28 Spline Posi Unit Chevrolet Gmc Locker- It has not been ran much if at all. No longer need it for the build. Great for a street rod, daily driver, 4X4 project. 4-SPRING clutch posi unit similar to an Eaton brand. MISC3225 this is a GM8.2 10-BOLT posi unit in 28 spline...(January 16th, 2024)
• Gm Gm8.5 8.6-30posi Used 8.5 8.6 Inch 10 Bolt Chevy 30 Spline Posi Unit Chevrolet Gmc Locker It has not been ran much if at all. 4-SPRING clutch posi unit similar to an Eaton brand. Great for a street rod, daily driver, 4X4 project. This is a Gm 8.5/8.6 10-BOLT posi unit in 30 spline. No longer need it for the build. 400LB springs...(January 30th, 2024)